MikroTik - Configure hotspot and PPPOE server on same router port with userman

Today we will learn how to configure MikroTik hotspot and PPPOE server on the same router port. we will configure MikroTik Radius server userman which will serve both hotspot and PPPOE server.

MikroTik RouterOS is powerful Linux based OS and have lots of features
from firewall to Load balance and hotspot to VPN server. One of these is builtin radius server userman which serve as central user database and billing AAA server (Prepaid and postpaid) for all the service which support Radius client (NAS) even for remote NAS clients.

I assume that you are familiar with MikroTik Hotspot, PPPOE and userman server. So lets get to work.

MikroTik Part

1. Login to your MikroTik via winbox
2. Setup hotspot on ether2 (in my case) and enable Use Radius in the Server profile tab of hotspot
3. Setup PPPOE server ether2 (in my case) and enable Use Radius on Secrets -> PPP Authentication & Accounting 
4. Now setup Radius by adding 127.0.0.1, secret and check the  ppp and hotspot 
5. That's all for MikroTik

Now comes the Userman Radius Part

1. Login to userman by typing IP-Address-Of-MikroTik/userman in browser
2. The default login is admin with no password
3. Then goto Routers -> Add -> New and Enter Name, 127.0.0.1, secret (as give in step 4 above)
4. Click Add
5. Now goto Users -> Add -> One and fill out the user details
6. That's all for userman
7. All done, Now test this user from client machine for hotspot as well as PPPOE dialer

Thanks for reading and watching.
Visit my YouTube Channel HomeTech

Please Support my YouTube Channel by liking and subscribing
I spend more time on my YouTube Channel so all comments are 101%  replied there
Comments and suggestions are welcome to improve the tutorial and help other

Share Happiness

See the video for more details
https://join-adf.ly/14844685