I assume that you have already configured MikroTik LAN/ WAN / DNS IP address.
- Login to your MikroTik Router using winbox
- Goto IP -> IP Pool
- Click + Enter
- Name of IP Pool (PPTP-IP-Pool1 in my case),
- Addresses (172.16.10.0/24 in my case) any private class ip range and
- Click OK
- Now Click PPP -> Interface tab
- Click PPTP Server button
- Check Enable
- Select pap, mschap1 and mschap2
- Click OK
- Now Click on Profile tab then Click +
- On General tab
- Ente Name (512Kbps-PPTP-profile1 in my case)
- Local address as PPTP-IP-Pool1
- Remote address as PPTP-IP-Pool1
- Then click on Limits tab and enter
- Rate Limit (rx/tx) (256K/512K in my case) Upload / Download Limit
- Click OK
- Now Click on Secret tab and then click +
- Enter Name (pptp2 in my case)
- Enter Password (pptp2 in my case)
- Select Service as pptp
- Select Profile (512Kbps-PPTP-profile1 in my case)
- Click OK
- Add and NAT Rule in Firewall for PPTP-IP-Pool
Login your Windows Machine (Windows XP in my case) and create a PPTP VPN Dialup connection
Enter the username and password created in MikroTik (pptp2/pptp2) and connect
It will connect to your MikroTik PPTP VPN Server and now can access internet via PPTP VPN service
Thanks for reading and watching.
Visit my YouTube Channel by clicking link below
Please Support my YouTube Channel by liking and subscribing
I spend more time on my YouTube Channel so all comments are replied 101% there
Comments and suggestions are welcome to improve the tutorial and help other
Share Happiness
See the video for more details
Visit my YouTube Channel by clicking link below
Please Support my YouTube Channel by liking and subscribing
I spend more time on my YouTube Channel so all comments are replied 101% there
Comments and suggestions are welcome to improve the tutorial and help other
Share Happiness
Post a Comment