WiFi Mesh Network - Deploy Community Based WiFi Network with Commotion # 2

In previous post We have learn and install the commotion firmware on UBNT Bullet M2. Here i am going to show you the initial setup when you first login to the router. Before starting the configuration you must know following as these are very important when extending your WiFi Mesh network in future.

1. Network Name - What is name of your Network? like MyNet, MyMesh, CommunityMesh etc
2. Node Name - What is name of this Node? like MyMesh-AP1 etc
3. Admin password - will be used to login to a specific Node or AP for administration.
4. AP Password - Used by clients and user to connect to AP. Its a security key
5. WiFi Channel - The channel on which the Mesh will work. It should be same on all AP in the Mesh. Dual radio AP can have separate channel on Both Radio as they can work on different frequencies band. i.e 2.4GHz and 5GHz 

All these information need to be decided before head and properly noted for future reference and expansion of your Mesh network.
You can see the step by step configuration in video tutorail as well. Subscribe to my youtube channel more videos
Your comments and suggestions are welcomed.
Thanks for reading and watching.
Visit my YouTube Channel HomeTech

Please Support my YouTube Channel by liking and subscribing
I spend more time on my YouTube Channel so all comments are 101%  replied there
Comments and suggestions are welcome to improve the tutorial and help other

Share Happiness

See the video for more details